![intrepid Intrepid 6140 Director Installation And Service Manual Download Page 279](http://html.mh-extra.com/html/intrepid/intrepid-6140-director/intrepid-6140-director_installation-and-service-manual_2081876279.webp)
5
RRP: Backplane
5-43
Removal and Replacement Procedures (RRPs)
4. Insert and hand tighten the remaining six panhead Phillips
screws.
5. Using a standard Phillips screwdriver, tighten the 7 panhead
screws that secure the backplane to the card cage. Tighten the screws
alternately from bottom to top and from side to side.
6. Connect the maintenance port cable.
7. Replace the card cage and backplane in the director chassis. with
6 panhead Phillips screws. Use a standard Phillips screwdriver to
replace the 6 panhead Phillips screws.
8. Plug the Power/System LED assembly cable into the backplane.
9. Replace the SBAR assemblies (
RRP: SBAR Assembly
on page 5-36).
10. Replace the fan modules (
RRP: Fan Module
on page 5-30).
11. Replace the AC modules (
RRP: AC Module
on page 5-26).
12. Replace the power supplies (
RRP: Power Supply
on page 5-23).
13. Replace the port cards (
RRP: Port Module Card (UPM and XPM)
on
page 5-11).
14. Replace the CTP cards (
RRP: CTP Card
on page 5-6).
15. Disconnect the ESD wrist strap from the director chassis and your
wrist.
16. Replace the RFI shield.
17. Connect the power cords and power on the director (
Power-On
Procedure
on page 4-34).
18. Verify that POSTs complete and the green power LED on the front
bezel, green LED on the active CTP card, and green PWR OK
LEDs on both power supplies remain illuminated. If a problem is
indicated, go to
Chapter 3
,
Maintenance Analysis Procedures
(MAPS)
to isolate the problem.
19. Reprogram the replacement backplane with the original director
serial number:
a. Remove the protective cap from the 9-pin maintenance port at
the rear of the director (a flat-tip screwdriver may be
required). Connect the 9-pin end of the RS-232 modem cable to
the port.
b. Connect the other cable end to a 9-pin communication port
(COM1 or COM2) at the rear of the maintenance terminal PC.
Summary of Contents for Intrepid 6140 Director
