Intermec Trakker Antares 2420, User Manual

Page: 229 / 480

Nugg
Co de 39
Running Diagnostics
7-11
7
Beeper Test
Purpose: You can test the terminal beeper to make sure the entire beep volume range and beep
frequency range are available and working correctly. The Beeper Test can also help you
distinguish the different beep volumes to choose a level that you can hear in your working
environment.
Where Available: Choose the Main Board Menu from the Hardware Diagnostics menu.
Sample Screen:
242XU.145
BEEPER TEST
SELECT BEEP TEST:
(Hold down any key
to stop test)
1-Frequency Test
2-Volume Test
3-Club 39 Jam
4-K. 622
[Esc] Exit
Definition: Press
to test the beep frequency range. The terminal will sound a series of beeps
starting from a low frequency beep through the range to a high frequency beep, and then
back to a low frequency beep.
Press
to test the beep volume. The terminal sounds a series of beeps from a quiet
beep to a very loud beep.
Tests 3 and 4 also test the beep volume and frequency by playing a short tune. If you do
not hear any beeps during any of these tests, you may have a problem with the beeper or
internal speakers. For help, contact your local Intermec service representative.