Intermec Trakker Antares 2420, User Manual

Page: 192 / 480

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
5-20
Using Screen Mapping (DCS 300 v1.1)
You can use screen mapping to send screen transactions from a T2425 through the
DCS 300 to a host application. First, you create an application for your terminals. To
create an application that runs on your terminals, you can use the TRAKKER Antares
Programmer’s Software Kit (PSK) or EZBuilder and Microsoft C/C++ functions. The
terminal runs applications that are programmed in Microsoft C. For help, see “Creating
Applications for the Terminal” earlier in this chapter.
Then on the DCS 300, you use the Script Builder Tool to create script files that map
transaction fields from the terminal to host application fields. Using this tool, you can
also create logon and logoff sequences in host screens, handle regions (such as error
messages) on host screens, and send messages back to the source of the transaction, such
as the terminal. For help, see the DCS 300 System Manual.
Make sure you have installed the terminal in your Intermec 2.4 GHz RF network. For
help, see Chapter 1, “Getting Started.” If you have completed these tasks, you can start
running your application and screen mapping.
Note: If you are running DCS 300 v1.0 software or you are using a Model 200
Controller, screen mapping was supported using terminal templates and a terminal
template application. For help, contact Intermec Technical Support.