Intermec Trakker Antares 2420, User Manual

Page: 260 / 480

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
8-18
Receive File Through the Serial Port (continued)
Example: To receive the file
SHIPPING.BIN
on the terminal’s drive C by using the
XMODEM
protocol through COM1, use this command:
.%X1,c:shipping.bin
Batch Transfer: To transfer a batch of files to the terminal by using the
YMODEM
protocol, use your
serial communications package to start the transfer. You usually select a batch of files
using a wild card file specification. The host must send only the filename and extension,
not the drive and directory path in the data stream.
Next, use this command to receive the files on the T2420 or T2425:
.%Y n,drive:
For example, to receive the files through COM1 to drive C on the terminal, use this
command:
.%Y1,c:
All files that match the wild card specification are transferred from the host and received
to drive C on the terminal. If any file does not transfer, the remainder of the batch
transfer is aborted.
Receive File Via RF Communications
Purpose: Receives a file from the DCS 300 or host and saves it on the T2425.
From Network:
.%R, fromfilename,drive:tofilename
where:
.%R
is the command to receive a file that is transmitted over the RF
network. The “R” indicates a file transmitted via RF communications
to the T2425.
fromfilename is the name of the file you are transmitting from the DCS 300 or host to
the T2425. On the DCS 300, the file must be sent from the
D:\USERDATA
directory. To receive a file from the host, you need to
identify the path and filename.
Note: Do not specify the DCS 300 pathname
D:\USERDATA
in the
fromfilename field.
drive: indicates the drive on the T2425 where you want to receive and store
the file. You must include the colon (:) after the drive letter.
tofilename is the name of the file you want to save on the T2425.
Keypad: Not supported