Intermec Janus 2050, User Manual

Page: 81 / 419

JANUS 2050 Vehicle-Mount Computer User’s Manual (4MB)
CD39 CD39
nugg nugg
3-18
where:
path\ is the drive and directory of the file(s) you want loaded.
filename is the name of the file(s) you want to load. You can specify
more than one file, or use path\*.* to load all the files from a specified
directory.
Note: All existing files on drive C remain intact, unless they are replaced by
new files with the same name.
2. Once you have typed in one of the LOAD commands, press
e
and follow
any instructions displayed on the host computer’s screen. The auto-load
procedure uses the Interlnk/Intersvr utilities to communicate with the
JANUS 2050.
3. When the Intersvr screen appears on the host computer, perform a warm
boot on the JANUS 2050 to begin executing Interlnk.
4. The JANUS 2050 drive C is updated with the files contained in the image
file. After drive C is updated, the JANUS 2050 reboots automatically.
5. Press
a
-
o
to exit Intersvr on the host computer. Interlnk will still be
loaded in memory on the JANUS 2050. If you need the memory, perform a
warm boot on the JANUS 2050.
The auto-load process saves all the files included in the drive C image file to
the subdirectory NEWDRV_C\C_FINAL on the host computer. This
subdirectory is overwritten each time a LOAD or MAKE batch file executes.
The auto-load process also creates a copy of the new drive C image file and
saves it in the file NEWDRV_C\IMAGE\DRIVEC.IMG on the host computer.
You can load this image file onto another JANUS 2050. Enter the following
command on the host computer:
loadximg
Follow Steps 2 through 5 above to use Interlnk/Intersvr and load the image file
on the JANUS 2050 drive C.
Note: Any files residing on drive C are overwritten.
Creating an Image File
You use the Auto-Loader MAKE batch files to create an image file and save it
on the host computer. You do not have to connect the JANUS 2050 to the host
computer when using the MAKE batch files. The image file is saved to
NEWDRV_C\IMAGE\DRIVEC.IMG. Once you have created the image file,
you can load the same image on one or more JANUS 2050s at a later date.