Intermec Janus 2050, User Manual

Page: 128 / 419

39
nugget
A Using PC Cards
5-17
5
Formatting an SRAM PC card
1. Insert the SRAM card in the PC card drive.
2. Type this command and press
e
:
format { drive:}
where drive: is the PC card drive.
3. You are ready to use the SRAM card.
Using the SRAM PC Card
You can use standard DOS commands to copy, delete, and move files, and to
create and remove directories on an SRAM card. To learn which DOS
commands are available on the reader, see the MS-DOS Programs companion
disk 2. For help using DOS commands, see any DOS manual.
For example, to copy all the files from drive C to drive G (PC card drive), type
this command at the DOS prompt:
copy c:\*.* g:
To delete all the files on the SRAM card in drive G, type this command at the
DOS prompt:
del g:\*.*
Managing the Power on the PC Card Drive
You can use a utility called CARDINFO.EXE to manage the power on the PC
card drive and to get information about the card currently inserted in your
JANUS 2050.
You can run CARDINFO at any time to:
• Display information about the type of card that is currently inserted in each
PC card drive.
• Turn off or on the power to a PC card drive when a PC card is installed in
the drive.
• Display the drive letter designation for your ATA PC card.
• Display detailed information about the PC card and drive configuration,
including the I/O ports, Interrupt Request Queue (IRQ) resources, and
memory areas that are being used by each card.
• Display the latest error that occurred for a PC card that is installed in a
drive.