Intermec Janus 2050, User Manual

Page: 62 / 419

39
nugget
A Operating the JANUS 2050
2-23
2
Drive E
Drive E is a RAM drive and uses a FAT-based file format. It can be used to
store data files and user applications.
The device driver for drive E is SRAMDISK.SYS, which requires HIMEM.SYS
to execute. This drive can be reduced or eliminated and the freed memory used
as extended memory by an application. Creating and reconfiguring the RAM
drive is discussed in Chapter 3, “Using the JANUS 2050 Software.”
PC Card Drive (G)
The PC card drive on the JANUS 2050 is similar to a disk drive on a PC. Use a
PC card, which is like a floppy disk, to store data and transfer information to
other computers.
You access the PC card drive as drive G on the JANUS 2050. This external drive
is located on the bottom side of the JANUS 2050. When a card is properly
formatted, you can access it directly from the JANUS 2050. The JANUS 2050
uses memory and input/output cards that comply with the PCMCIA 2.1
standards for Type I and II cards. See Chapter 5, “Using PC Cards,” for more
information.
Note: If you have a new PC card, it must be formatted before you can use it in the
JANUS 2050. See “Configuring, Formatting, and Using PC Cards” in Chapter 5 for
information on formatting ATA, SRAM, I/O, and flash cards.
Note: JANUS 2050s equipped with a 2.4 GHz radio use the PC card slot for the radio
controller.