Intermec Janus 2050, User Manual

Page: 130 / 419

39
nugget
A Using PC Cards
5-19
5
This section covers these topics:
• Drivers in CONFIG.SYS
• Drivers in AUTOEXEC.BAT
• Tips for Enabling PC Card Drivers
Drivers in CONFIG.SYS
Your CONFIG.SYS must contain these lines to support the PC card drive:
device=d:\cs.exe /poll 1
device=d:\csalloc.exe d:\csalloc.ini
install=d:\card_sr.exe
Note: If you delete or remark out these lines, you cannot use the PC card drives.
CONFIG.SYS also contains lines that support specific types of PC cards, such
as ATA cards. To save conventional memory, you can comment out all the
drivers except for the ones that apply to the type of card (or cards) currently
installed in the reader.
Type of Card Lines You Need to Activate the Device Drivers
ATA
device=c:\atadrv.exe /s:2
device=c:\mtddrv.exe
device=d:\cardid.exe d:\cardid.ini
Flash
device=c:\mti1.exe
device=c:\mti2p.exe
device=c:\mtddrv.exe
device=c:\ftl.exe (or: c:\ms-flash.sys)
I/O
device=d:\cardid.exe d:\cardid.ini
SRAM
device=c:\mtsram.exe
device=c:\mtddrv.exe
Drivers in AUTOEXEC.BAT
The AUTOEXEC.BAT file loads one of these drivers:
• IPM_4M.EXE for ATA, flash, and SRAM cards
• APM_4M.EXE for I/O cards
You load one or the other, but not both drivers at the same time. If you need to
install both, install APM_4M.EXE because it does everything IPM_4M.EXE does.