Intermec Janus 2050, User Manual

Page: 264 / 419

39
nugget
A Configuration Commands
10-45
10
Display Setup
Purpose: Defines the number of columns and rows in the display image, the video
mode, at what row the display scrolls, and the character height.
The JANUS 2050 video modes are used in the same way as on a PC.
Default: Display size 80 columns x 25 rows, video mode 3, scrolls at row 25, and normal
character height.
Syntax: DSdata
Acceptable values for data are four digits corresponding to:
First digit: 0 80 x 25
Second digit: 0 Video mode 0 (double character width)
1 Video mode 1 (double character width)
2 Video mode 2 (normal character width)
3 Video mode 3 (normal character width)
Third digit: 0 Scroll at row 25
3 Scroll at row 13
Fourth digit: 0 Normal character height
1 Double character height
Note: When you scan a label that changes the video mode, the screen goes blank. To
bring the screen back, begin entering data.
Scan: One of the following labels to set display options:
25 x 40, Video Mode 0, Scroll at Row 25, Normal Height
*$+DS0000*
*$+DS0000*
25 x 40, Video Mode 0, Scroll at Row 13, Double Height
*$+DS0031*
*$+DS0031*
25 x 40, Video Mode 1, Scroll at Row 25, Normal Height
*$+DS0100*
*$+DS0100*