Intermec Janus 2050, User Manual

Page: 70 / 419

nugg nugg
JVMU JVMU
Using the JANUS 2050 Software
3-7
3
AUTOEXEC.BAT File (continued)
Command Line Definition
set temp=e:\
A temp directory is required for MORE.COM to work
correctly on ROM drives.
set im_errpath=e:\
Tells the JANUS device to write the configuration error file
JANUS.ERR to drive E. The JANUS device must execute this
command before it calls LOADUMA.EXE.
d:
d:\ipm_4m.exe
REM d:\apm_4m.exe
IPM_4M and APM_4M work with card services to manage
the power on the PC card drive when you suspend and
resume the JANUS device.
Note: Do not load both at the same time, but you must
load one.
if exist d:\loaduma.exe d:\loaduma
Loads Reader Services, Configuration Manager TSR, and the
decode and scanner utilities that let the JANUS device
operate as a bar code reader.
d:\im_disp.exe
Loads software required for the display.
d:\ic /0 e:\janus.ini
Loads the JANUS.INI configuration file if it exists.
d:\kwc.com 0
Sets the bar code wedge options. The default configuration
is 0. Configuration parameters are:
0
Virtual wedge and expanded keyboard enabled.
1 Direct Hardware wedge and expanded keyboard
enabled.
2 Direct Hardware wedge enabled and expanded
keyboard disabled.
3 Virtual Wedge enabled and expanded keyboard
disabled.
4
Display status.
rfph 4
Loads the RF protocol handler for COM4 only if you are
using a JANUS RF device.