Intermec Janus 2050, User Manual

Page: 268 / 419

39
nugget
A Configuration Commands
10-49
10
EOM (End of Message continued)
2. Scan one or two bar codes for data from the full ASCII chart in
Appendix A.
3. Scan this bar code:
Exit Accumulate
*-/*
*-/*
Or:
To set EOM transmit and receive to different ASCII characters:
Note: You can enable an EOM transmit character and disable the EOM receive
character, or vice versa.
1. Scan this bar code to set the EOM transmit character:
Enter Accumulate / Enable EOM, Transmit Only
*+/$+PI*
*+/$+PI*
2. Scan one or two bar codes for data from the full ASCII chart in
Appendix A.
3. Scan this bar code:
Exit Accumulate
*-/*
*-/*
4. Scan this bar code to set the EOM receive character:
Enter Accumulate / Enable EOM, Receive Only
*+/$+PJ*
*+/$+PJ*
5. Scan one or two bar codes for data from the full ASCII chart in
Appendix A.
6. Scan this bar code:
Exit Accumulate
*-/*
*-/*