Intermec Janus 2050, User Manual

Page: 35 / 419

JANUS 2050 Vehicle-Mount Computer User’s Manual (4MB) 39
nugget
A
1-14
Setting the Time and Date
To set the date and time
1. At the DOS prompt, scan the following bar code to set the time:
*TIME*
*TIME*
2. Enter the current time in the format HH:MM:SS. Press
f F
to enter the
colons. When you have typed in the time, press
e
.
3. Scan the following bar code to set the date:
*DATE*
*DATE*
4. Enter the current date in the format MM-DD-YY. Press
f H
to enter the
dashes. When you have typed in the date, press
e
.
Note: You can type the TIME and DATE commands at the DOS prompt if you have
not connected a scanner to the JANUS 2050.
Entering Data
You can enter data using the JANUS 2050 keypad or by scanning bar code
labels. For example, the
dir
command lists the contents of a drive. At the DOS
prompt, type the following command using the keypad:
dir
Then, press
e
to execute the command.
Or, scan the following bar code:
*DIR*
*DIR*
The directory of the current drive displays on the JANUS 2050 screen.