28
Windows NT Workstation 4.0
Depending on your system’s configuration, you will need some or all of the following system
software (on backup diskette or on the operating system CD-ROM) during installation:
u
SCSI adapter driver
u
G76, G95, or Intense 3D Pro video display driver
u
Network adapter driver
u
Sound processor driver
u
Mouse driver
u
QFE update software
NOTE
When installing the G76 video display driver from the Windows NT Workstation 4.0
CD-ROM, note that the driver is listed as an “S3 732/764/765 compatible” driver.
NOTE
TD-20 and TD-200 systems have different sound processors and require different sound
processor drivers. TD-20 systems use the Sound Blaster driver; TD-200 systems use the
Crystal Audio driver.
Follow the instructions in Start Here to install Windows NT Workstation 4.0. As you install
the operating system:
u
You can safely select the default responses during the Setup process.
u
Allow Setup to configure the network only if you have an installed network adapter, and
then only if the system is connected to the network.
u
When prompted to create an Emergency Repair Disk, do so.
After installing the operating system:
u
Install drivers or other system software from any backup diskettes. System software
delivered on backup diskette is usually more current than system software on the
operating system CD-ROM.
u
If you created a Quick-Fix Engineering (QFE) backup diskette during system
configuration, install the QFE update software. Refer to the
README
.
TXT
file on the QFE
diskette for more information.
u
Configure the system as described in Chapter 3, “Configuring the System.”
u
Perform any additional installation and configuration tasks described in the Late-Breaking
News document delivered with your system.
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......
