7
2 Setting Up the Software
Follow the instructions in this chapter to set up the operating system and associated system
software on your TD-20 or TD-200 system.
Preparing for Setup
The operating system and associated system software are installed on the system’s hard disk.
Intergraph installed the following system software:
u
Driver software for the video display adapter
u
Driver software for the on-board sound processor
u
Operating system network software (TCP/IP and NetBEUI, if the network adapter is
installed)
u
Quick-Fix Engineering (QFE) update software -- fixes for operating system problems or
limitations on your Intergraph system (if any are needed)
u
The default File Allocation Table (FAT) file system.
The first time you start the system, it boots to a Setup screen or a logon dialog for the
operating system. If your system boots to a Setup screen, you follow the Setup process to
prepare the operating system -- Microsoft Windows NT Workstation or Microsoft Windows
95 -- for use.
Before you go through Setup, have the following documentation available:
u
Microsoft’s Installation Guide (Windows NT Workstation 3.51), Start Here (Windows
NT Workstation 4.0), or Welcome to Windows 95.
u
Documentation for expansion boards purchased from Intergraph (which may include a
video display adapter, a network adapter, a SCSI adapter, and a PC Card adapter).
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......
