Intergraph TD-20 Setup, Setup Manual

Page: 14 / 66

2
u
Do not operate the base unit on its side.
u
Do not expose the system to high levels of dust, smoke, or moisture.
u
The location should maintain a temperature range of 10
°
C (50
°
F) to 26
°
C (80
°
F ); the
optimum operating temperature is 21
°
C (70
°
F ). The location should maintain a
humidity range of 20 percent to 80 percent non-condensing; the optimum humidity level
is 50 percent.
CAUTION Do not move the monitor or the base unit without first turning off power, or damage to internal
components may result.
Connecting Cables
Connect the following cables to their ports on the back panel of the base unit. Refer to the
figures on the following pages, and to the documentation delivered with any expansion boards
purchased from Intergraph, for connection details.
u
Keyboard cable to keyboard port (PS/2 type)
u
Mouse cable to mouse port (PS/2 type)
u
Video cable from monitor to video port on the installed video display adapter
u
Network cable to network port (on the optional network adapter board)
u
SCSI cable to SCSI port (on the optional SCSI adapter board)
u
Microphone cable to microphone port (on systems with an optional microphone)
u
On a TD-20 with optional speakers, speaker cable to speaker port
u
On a TD-200 with optional speakers, speaker cable to line out port; speaker power cable
from amplified speaker to speaker power port
All ports and cables are keyed or molded for proper cable connection. If a cable does not
connect easily, make sure you are aligning the cable connector correctly with the port.
CAUTION If you do not use cables supplied by Intergraph, use shielded cables to prevent excessive
electromagnetic interference (EMI). Intergraph cables are designed to reduce the amount of
EMI produced by the system.
NOTE The TD-20 uses non-powered (non-amplified) speakers; the TD-200 uses powered (amplified)
speakers. Ensure that you use the correct type of speakers for your system.