Intergraph TD-20 Setup, Setup Manual

Page: 21 / 66

9
Have several blank, formatted diskettes available to create backup diskettes containing system
software.
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \
I
386 directory (the Intel software directory) on the
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i386
Going Through Setup
On a system running Windows NT Workstation 4.0 or Windows 95, the first time you start the
system, it boots to a Setup screen. Select Next to start Setup, and follow the instructions
provided on-screen to complete the process. Take the default settings provided by Setup,
except as noted in the following text. You can set up a user account and join a workgroup or
domain after you configure the video display, the sound processor, and networking.
On a system running Windows NT Workstation 4.0 or Windows 95:
u
Allow Setup to configure the network only if you have an installed network adapter, and
the system is connected to the network.
u
When prompted to create an Emergency Repair Disk (Windows NT Workstation) or a
Startup Diskette (Windows 95), do so.
u
If you do not set up a user account during Setup, press
ENTER
or select OK at the logon
dialog to log on to the operating system.
On a system running Windows NT Workstation 4.0:
u
The system’s hard disk drive contains Windows NT Workstation Setup files in the
C
:\
I
386
directory. When installing network or video display adapter drivers, you can refer to the
I
386 directory when prompted for the location of Windows NT Workstation Setup files.
If you delete the
I
386 directory from the system’s hard disk, you must have access to a
Windows NT Workstation CD-ROM to use Windows NT Workstation Setup files.