18
Refer to the appropriate System Board Manual for information on using BIOS Setup.
SCSI System BIOS
On a system equipped with a Small Computer System Interface (SCSI) adapter and internal
SCSI hard disk drives, the BIOS is configured to boot from and use the SCSI disk drives. If
you update the BIOS or reset the BIOS configuration, make sure the appropriate BIOS
parameters are set correctly for a SCSI system.
TD-20 BIOS
In BIOS Setup, on the Advanced screen, set Integrated PCI IDE to Primary.
TD-200 BIOS
If you have a version of the BIOS previous to 01.00.11.CS1, do the following in BIOS Setup:
u
On the Advanced/Plug and Play Configuration screen, set Configuration Mode to Use
ICU.
u
On the Advanced/Plug and Play Configuration screen, set Boot with PnP OS to None.
u
On the Advanced/Peripheral Configuration screen, set Secondary IDE Interface to
Disabled.
Updating the BIOS
From time to time, new versions of the system’s basic input/output system (BIOS) are made
available on the Intergraph Bulletin Board Service (IBBS). You may want to update the
system’s current BIOS with a new version to take advantage of fixes or enhancements.
TD-20 BIOS
To update the TD-20 BIOS:
1. Record the BIOS parameter settings for your system. To do this, restart the system, and
press
F
2 during boot to run BIOS Setup. Write down the setting for each parameter; then
exit from BIOS Setup and let the system continue to boot.
2. From the IBBS login, go to Intergraph Product Centers, Systems and Networking, File
Libraries, and Delivered Drivers; select the operating system and hardware platform.
3. Find
the
FLASHPROG
product and download it to a directory on your system.
4. Use an unzip utility to open the
FLASHPROG
product and extract the files from it.
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......