23
4 Operating Notes
Refer to the information in this chapter when operating your Intergraph TD-20 or TD-200
system.
Starting and Stopping the System
After you complete Setup and start the system for the first time, you can start and stop the
system as needed.
To start the operating system:
1. Turn on power to the system.
2. On a system running Windows 95, the operating system starts. On a system running
Windows NT, the boot menu displays; select Windows NT Workstation to display the
logon dialog.
To log on to the operating system:
1. If the logon dialog does not display, press
CTRL
+
ALT
+
DELETE
to display it.
2. Type a username and password into the appropriate boxes.
3. On a system running Windows NT Workstation, if appropriate, type a domain name.
4. Select OK or press
ENTER
.
To stop the operating system:
1. Select Shut Down from the Start menu (Windows NT Workstation 4.0 or Windows 95),
or press
CTRL
+
ALT
+
DELETE
(Windows NT Workstation 3.51).
2. To stop the operating system, select the logoff or “close all programs” option (if
available), and then select OK.
3. To restart the system, select the restart option, and then select OK.
4. To shut down the system, select the shutdown option, and then select OK.
After shutting down or logging off the operating system, press the power switches on the base
unit and the monitor to turn off power to the system.
For more information on starting and stopping the operating system, refer to the operating
system documentation and Help.
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......
