Intergraph TD-20 Setup, Setup Manual

Page: 25 / 66

13
3 Configuring the System
Follow the instructions in this chapter to configure your Intergraph TD-20 or TD-200 system
for use.
Configuring the Video Display
The first time you start the system, it uses the installed video display adapter running at
standard VGA resolution (640 x 480) to run the video display. For the system to use the
installed video display adapter at other display resolutions, you must configure the video
display driver. On systems running Windows NT Workstation 4.0 and Windows 95, you can
do this during first-time setup.
To configure the video display, open Display in the Control Panel. Use the Display Properties
dialog (Windows NT Workstation 4.0 and Windows 95) or the Display Settings dialog
(Windows NT Workstation 3.51) to configure the video display.
Refer to the documentation and
README
.
TXT
files accompanying the installed video display
adapter and driver for detailed configuration instructions. Refer to the operating system
documentation and Help for information on using the Display Properties or Display Settings
dialog.
Installing Windows NT Service Pack Software (Intense 3D Pro Graphics)
On a TD-200 system with Intense 3D Pro graphics running Windows NT Workstation 3.51,
you must install Windows NT Workstation 3.51 Service Pack 4 software. Service Pack 4
software is available on the Microsoft Service Pack 4 CD-ROM delivered with the system.
Refer to the
README
.
TXT
file on the Service Pack 4 CD-ROM for more information.
NOTE You cannot remove an installed Service Pack. To return your system to its original
configuration, you must re-install Windows NT Workstation 3.51.
CAUTION Installing Service Pack 4 may affect removal of installed Intergraph software products.
Microsoft has provided a fix for this, and Intergraph has included this fix in the Quick-Fix
Engineering (QFE) update software delivered with the system.