19
5. Insert a diskette into the floppy disk drive.
6. In the directory containing the
FLASHPROG
files, run the
INSTALL
.
BAT
program. This
creates a boot diskette with the new BIOS file and the BIOS flash programming utility.
7. After
the
INSTALL
.
BAT
program completes, leave the diskette in the floppy disk drive and
restart the system.
8. At the MS-DOS command prompt, run
PHLASH
.
EXE
to update the current BIOS. For
example, if the BIOS file on the boot diskette is named
M
5503.
ROM
, you would key in the
following commands, in order, to update the BIOS:
phlash
m5503.rom
9. After the BIOS is updated, the system shuts down. Remove the diskette from the floppy
disk drive and label it BIOS Update date, where date is today’s date.
10. Turn on power to the system.
11. As the system boots, press
F
2 when you see a message like the following:
PhoenixBIOS Version 4.05 M55Hi-Plus 03
BIOS Setup starts.
12. Make sure that all parameter settings match the settings you recorded before you updated
the BIOS. In particular, verify that on both the Main/IDE Adapter 0 Master and
Main/IDE Adapter 0 Slave screens, both LBA Mode Control and 32 Bit I/O are set to
Enabled.
13. Save and exit from BIOS Setup.
14. Restart the system.
For more information on the phlash command, type phlash /? at the command prompt. For
more information on updating the BIOS, refer to the
README
.
TXT
file delivered with the
FLASHPROG
product.
TD-200 BIOS
To update the TD-200 BIOS:
1. Record the BIOS parameter settings for your system. To do this, restart the system, and
press
F
1 during boot to run BIOS Setup. Write down the setting for each parameter; then
exit from BIOS Setup and let the system continue to boot.
2. From the IBBS login, go to Intergraph Product Centers, Systems and Networking, File
Libraries, and Delivered Drivers; select the operating system and hardware platform.
3. Find
the
FLASHPROG
product and download it to a directory on your system.
4. Use an unzip utility to open the
FLASHPROG
product and extract the files from it.
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......
