Intergraph TD-20 Setup, Setup Manual

Page: 52 / 66

40
Adding Internal Peripheral Devices
You can add internal SCSI, IDE, or EIDE peripheral devices by installing them in any
available peripheral bays. The system has the following available peripheral bays:
u
Two 5.25-inch x 1.6-inch peripheral bays for devices accessible from outside the system.
If you purchased a CD-ROM drive and a PC Card slot from Intergraph, they occupy these
bays.
u
Three 3.5-inch peripheral bays for devices not accessible from outside the system, such as
hard disk drives. These bays can support three 1.0-inch high devices or one 1.6-inch high
device.
An additional 3.5-inch x 1.0-inch peripheral bay contains the system’s floppy disk drive.
The following figure shows the location of the peripheral bays, viewed from the left side of the
base unit with the cover removed.
5.25-inch
Peripheral Bays
3.5-inch
Peripheral Bays
Support Bracket