1
1 Setting Up the Hardware
Follow the instruction in this chapter to set up the hardware for your TD-20 or TD-200
system.
Unpacking the System
Remove everything from the shipping cartons, then look for the following items:
u
A monitor, with video cable, power cord, and documentation (if purchased from
Intergraph)
u
The system’s base unit and power cord
u
The system’s keyboard and mouse
u
Windows NT Workstation or Windows 95 operating system software (CD-ROM and
diskettes) and documentation
u
Intergraph system documentation
u
System software (diskettes) and documentation for expansion boards purchased from
Intergraph (which may include a video display adapter, a network adapter, a SCSI
adapter, and a PC Card slot adapter)
CAUTION
Carefully remove the monitor and the base unit from their packaging. Do not let the monitor or
the base unit drop onto a hard surface, or damage to internal components may result.
NOTE
If any of these items were not delivered, call the Customer Response Center immediately at 1-
800-633-7248.
Retain all packaging materials. If you return the system for repair, it must be in its original
packaging for you to obtain warranty service (if provided under your contract agreement).
Placing System Components
When placing the system’s components, follow these guidelines:
u
Move and place the monitor and the base unit carefully.
u
Place the base unit in a location where air can circulate freely around it. There should be
at least 3 inches of clearance in front of and in back of the base unit.
Summary of Contents for TD-20 Setup
Page 1: ...TD 20 TD 200 System Setup March 1997 DHA018940...
Page 18: ...6...
Page 34: ...22...
Page 66: ......