Intel SRCMR, User Manual

Page: 76 / 180

76 Intel RAID Controller SRCMR User’s Guide
Loading StorCon
The StorCon program is available for various operating systems (NetWare 5.1, Windows NT,
Windows 2000, Windows 95/98, Linux, and SCO UnixWare). It can be used either locally or
remotely. All Intel RAID Controller SRCMRs in a network can be monitored and serviced from
one or several workstation(s).
Loading the StorCon Program Under NetWare
The StorCon program for NetWare is part of the Intel RAID Controller SRCMR System CD-ROM.
StorCon can be used under NetWare 5.1. There are two methods of loading StorCon.
•
Loading StorCon on the fileserver
•
Loading StorCon on an authorized workstation (remote)
Loading StorCon on a Fileserver
✏
NOTE
The Intel RAID Controller SRCMR NetWare driver and the auto-loading module CTRLTRAN must
have been previously loaded on the fileserver. Use the following command to load StorCon:
LOAD StorCon
Loading StorCon on a Workstation
✏
NOTE
The Intel RAID Controller SRCMR NetWare driver, the auto-loading module CTRLTRAN and
module CTRLIPX.NLM must have been previously loaded on the fileserver console. This module
searches for a file named CTRLIPX.CFG. This file must be located in the same directory as
CTRLIPX.NLM. Additionally, the system administrator must set up a user group named
IIR_OPERATOR. All users belonging to this group are given access (through StorCon) to the Intel
RAID Controller SRCMR(s) in this specific fileserver (Access level 0).
Load the StorCon program from one (or more) workstation(s) using the following command:
StorCon