Intel SRCMR, User Manual

Page: 62 / 180

62 Intel RAID Controller SRCMR User’s Guide
New Installation of NetWare 5.1
The following procedures assume that your Intel RAID Controller SRCMR(s) is(are) already
installed in your system. If you plan to install the OS to a RAID volume, you must first configure
the RAID volume through the XROM version of Storage Console. At system boot time, press
<Ctrl>+<g> when prompted to invoke the XROM version of Storage Console.
✏
NOTE
Install all Novell patches and updates prior to installing the Intel RAID Controller SRCMR driver
and Storage Console. These updates can be found at:
http://www.novell.com
New Installation of NetWare 5.xx with the SRCRX.HAM Driver
1. Create a driver diskette from the RAID Software Suite CD-ROM. See Chapter 2 for details to
create this disk.
2. Start the OS installation from the NetWare bootable CD-ROM.
3. At the storage driver summary menu select modify drivers.
4. Insert the driver disk into drive A:
5. Press <Enter> on the storage driver list.
6. Press <Insert> in the storage controller driver menu.
7. Press <F3> and change the path to A:\DRIVERS\5XX then press <Enter>.
8. Select the SRCRX.HAM driver.
9. Complete the installation.
✏
NOTE
The above procedures install only the controller drivers. To install the Storage Console NLM,
follow the procedure under Add Intel RAID Controller(s), drivers, and/or Storage Console to and
existing NetWare installation and select Storage RAID Controller Tools Kit (STORCON.NLM)
option.