Intel SRCMR, User Manual

Page: 85 / 180

Storage Console 85
Monitor Menu
The monitor menu has the following menu options. See Figure 16.
•
Use View Statistics to supervise the performance of the different components of the RAID
subsystem.
•
View Events is an enhanced event recorder for RAID and controller-specific events.
Use View Hard Disk Info to view detailed information on the connected devices (important are the
retries, reassigns, grown defects and last status information).
Use Save Information to create a complete protocol file of the current RAID subsystem including
all settings of the Intel RAID Controller SRCMR and the drives. This file can be used for remote
diagnosis.
Express Setup / Advanced Setup Menus
Express Setup and Advanced Setup (Chapter 7) have the following menu options. See Figure 16.
Use Configure Host Drives to configure already existing host drives or create new ones. For
example, you can create a new host drive under normal operation without shutting down the
computer.
Use Repair Array Drives to repair array drives which have failed drives.
Use Configure Controller to setup the Intel RAID Controller SRCMR. Here, you can change the
cache settings, termination, and memory test, etc.
Use Configure Physical Devices to initialize the devices at the physical level, for example, change
the SCSI protocol, transfer rates, etc.
Use Configure Logical Drive to configure or create logical drives.
Use Configure Array Drives to configure or create array drives.