Intel SRCMR, User Manual

Page: 60 / 180

60 Intel RAID Controller SRCMR User’s Guide
Remote Monitoring with the Intel SRCD Remote Access
Service
srcd is the remote access service for Intel RAID Controller SRCMRs. With srcd running, you can
manage disk arrays from a remote workstation using storage management software (for example,
StorCon ) via TCP/IP.
Configure /etc/srcd.conf to send SNMP traps or execute an external program (for example, mail)
when a disk array controller event occurs. See comments in /etc/ srcd.conf for details.
SRCD Installation Instructions from the Intel RAID Controller
SRCMR CD-ROM
1. Copy the srcd archive to /etc (may be srcd-1.09-suse.tgz or srcd-1.09 redhat.tgz)
$ cp /mnt/cdrom/linux/install\srcd-v.vv-xxxx.tgz /etc/srcd-v.vv-xxxx.tgz
2. Unpack srcd-v.vv-xxxx.tgz:
$ tar /etc/xvfz srcd-v.vv-xxxx.tgz
3. Run install.sh. It will interactively set up a start script and a file /etc/ srcd.conf:
$ ./install.s
4. Edit /etc/srcd.conf to send SNMP traps or execute an external program when controller events
occur.
5. If srcd is not running, start it by executing one of the following commands:
For RedHat-Linux:
$ /etc/rc.d/rc2.d/srcd start