Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, User Manual

Page: 85 / 184

Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX 63
8. Install the replacement riser connector, if desired. For instructions, see “Installing a
PCI Riser Card” on page 63 .
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 61 .
10. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
11. Plug all peripheral devices and the AC power cable into the server.
Installing a PCI Riser Card
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” .
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 60 .
6. Remove any add-in cards from the PCI riser connector. For instructions, see
“Removing a PCI Add-in Card” on page 65 .
7. Use two screws to attach the riser card to the riser assembly. See the figure below.
Figure 60. Installing Riser Card onto Riser Assembly
8. Install an PCI add-in card if desired. For instructions, see “Installing a PCI Add-in
Card” on page 64 .
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 61 .
10. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
AF001060