Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, User Manual

Page: 55 / 184

Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX 33
Installing the Processor Air Duct
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 28 .
4. Lower the air duct into place, insert the two hooks at the front of the processor air
duct into the corresponding slots on the bracket behind the two system blower fans
(see
Figure 22 for SR1530AH/SR1530AHLX); see Figure 23 for SR1530HAHLX).
Use caution not to pinch or disengage cables that may be near or under the air duct.
5. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
Figure 22. Installing the Processor Air Duct (SR1530AH/SR1530AHLX)
AF000665