Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, User Manual

Page: 58 / 184

36 Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
Removing DIMMs
To remove a DIMM, follow these steps:
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 28 .
4. Locate the DIMM sockets. See Figure 24 .
5. Gently spread the retaining clips at each end of the socket. The DIMM lifts from
the socket.
6. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static
package.
7. Install the server system cover. For instructions, see “Installing the Server System
Cover” .