Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, User Manual

Page: 115 / 184

Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX 93
Installing and Removing the Rack Handles
Installing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the front bezel if it is installed. For instructions, see “Removing the Front
Bezel” on page 26 .
4. Attach the rack handle to the server system with two screws as shown in the figure
below.
Figure 86. Installing the Rack Handle
5. Repeat step 4 on the opposite side of the server.
6. Optional: Install the front bezel, if desired. For instructions, see “Installing the
Front Bezel” on page 27 .
7. Plug all peripheral devices and the AC power cable into the server.
AF001204