Intel® Server System S9200WK Product Family Setup and Service Guide
72
5.
System Packaging Assembly Instructions
The original Intel packaging is designed to provide protection to a fully configured system and tested to
meet ISTA (International Safe Transit Association) Test Procedure 3A (2008). The packaging is also designed
to be re-used.
The original packaging includes two layers of boxes
–
an inner box and the outer shipping box
–
and various
protective inner packaging components. The boxes and packaging components are designed to function
together as a protective packaging system. When reused, all the original packaging material must be used,
including both boxes and each inner packaging component. In addition, all inner packaging components
must be reinstalled in the proper location to ensure adequate protection of the system for subsequent
shipment.
Note:
The design of the inner packaging components does not prevent improper placement within the
packaging assembly. There is only one correct packaging assembly that will allow the package to meet the
ISTA (International Safe Transit Association) Test Procedure 3A (2008) limits.
Failure to follow the specified packaging assembly instructions may result in damage to the system during
shipment.
1.
Place two foam inserts into the inner box as shown. Note foam insert orientation.
2.
Place the Accessory Kit box between the end foam insert and the end wall of the inner box as shown.
