Intel® Server System S9200WK Product Family Setup and Service Guide
35
4.3
Riser Assembly Replacement
Before following the instructions in this section, remove the Intel® compute module (see Section 4.2.1)
needing service. This procedure applies to both 1U and 2U compute modules.
Required Tools and Supplies:
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Phillips head screwdriver
4.3.1
Riser Assembly Removal
Figure 28. Removing a riser assembly
1.
Remove the three screws that secure the riser assembly to the compute module (see Letter A).
2.
Carefully remove the riser assembly by lifting it up away from the compute module (see Letter B).
If the riser assembly is going to be shipped as part of a warranty replacement, remove all installed add-in
cards and/or storage SSDs.
