Intel® Server System S9200WK Product Family Setup and Service Guide
6
•
Hold all circuit boards and other electronic components by their edges only.
•
After removing electronic devices from the system or from their protective packaging, place them
component side up on to a grounded anti-static surface or conductive foam pad.
Do not
place electronic
devices on to the outside of any protective packaging.
Caution:
Slide/rail mounted equipment is not to be used as a shelf or a work space.
Intel warranties that this product will perform to its published specifications. However, all computer systems
are inherently subject to unpredictable system behavior under various environmental and other conditions.
This product is not intended to be the sole source for any critical data and the user must maintain a
verified backup. Failure to do so or to comply with other user notices in the product user guide and
specification documents may result in loss of or access to data.
Liquid cooling safety guidelines:
•
Make sure there are no leaks and/or damaged parts before operating the liquid cooling system.
•
Do not to energize system or compute module if liquid cooling system is compromised.
•
Do not attempt to perform any service before removing power to the liquid compute module, turn off
and disconnect power before disconnecting the liquid cooling quick disconnects tube connectors.
•
To reduce the risk of damage to the cooling system, use care when installing or removing the liquid
compute modules.
•
Avoid excessive force when connecting and disconnecting quick disconnect couplings.
•
Keep liquid cooling tubing clear of pinch points when sliding server nodes.