Intel® Server System S9200WK Product Family Setup and Service Guide
43
4.7
Liquid Cooling Loop Replacement (Liquid Cooled Compute Modules Only)
Before following the instructions in this section, remove the selected compute module from the server
chassis (see Section 4.2.1).
Required Tools and Supplies:
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Phillips head screwdriver
•
Torx* T-20 screwdriver
4.7.1
Liquid Cooling Loop Removal
Figure 41. Removing the cross head screws
1.
Remove the ten screws indicated in Figure 41 with a phillips head screwdriver.
Figure 42. Removing the T-20 screws
2.
Remove the eight screws indicated in Figure 42 with a Torx* T-20 screwdriver.
