SMASH
–
Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide
Revision 1.3
78
Figure 65: REMOTESAP1 Target
8.13
Remotesap2
8.13.1
Supported Properties
The supported properties of the target
remotesap2
are as follows:
Table 34: Remotesap2 - Supported Properties
Property
Task
dnsserveraddress
Gives the dns server address. This is a R/W property. The value of this property
can be set as follows:
> set dnsserveraddress=0.0.0.0
Identity
This read only property gives a brief explanation of the present target and
cannot be changed.
8.13.2
Supported Verbs
The supported verbs of the
remotesap2
target are as follows.
Table 35: Remotesap2 - Supported Verbs
Verb
Is used to
cd
change from one valid target path to any other valid target path.
exit
exit from the current SMASH* session.
help
provide information on using SMASH*.
set
set the r/w supported properties
