Intel Remote Management Module 3, User Manual

Page: 84 / 97

Intel® Remote Management Module 3 User Guide SMASH – Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)
Revision 1.3
73
8.9.1 Supported Properties
The supported properties of the target
ipendpt1
are as follows:
Table 26: Ipendpt1 - Supported Properties
Property Task
ipaddress The value of ipaddress is the IP address of the SP.
An IP address (Internet Protocol address) is a unique address that is used to identify
and communicate with each other on a computer network utilizing the Internet
Protocol standard (IP). This is an R/W property.
The value setting to the ipaddress affects the IP of the SP.
> set ipaddress=10.0.4.79
This will change the ipaddress of the sp. After changing, use committed property to
save.
subnetmask This is the value of the subnetmask of the SP. A subnetmask is a range of logical
addresses within the address space that is assigned to an organization. This is an
R/W property. The value setting to the ipaddress affects the IP of the SP.
> set subnetmask=255.255.248.0
This will change the subnetmask of the sp. After changing, use committed property
to save.
usedhcp
Dynamic Host Configuration Protocol (DHCP) is a protocol used by networked devices
to obtain various parameters necessary for the networked devices to operate in an
Internet Protocol (IP) network. This property has two values (1 for DHCP and 0 for
Static). This is a R/W property.
> set usedhcp=1
committed Once the ipaddress or subnetmask is set to 1, the property saves all the changes
made. In addition, the network settings also change and network connection is lost.
> Set committed=1
Identity This read only property gives a brief explanation of the present target and cannot be
changed.
8.9.2 Supported Verbs
The supported verbs of the
ipendpt1
target are as follows:
Table 27: Lanendpt1 - Supported Verbs
Verb Is used to
cd change from one valid target path to any other valid target path.
exit exit from the current SMASH* session.
help provide information on using SMASH*.
set
set the r/w supported properties
show show all the targets, properties, and verbs supported by this target.
version show the current version of SMASH*.