Intel Remote Management Module 3, User Manual

Page: 76 / 97

Intel® Remote Management Module 3 User Guide SMASH – Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)
Revision 1.3
65
8.4 Settings1
Settings1 target represents the settings of the current session of SMASH* and does not have
any targets. This target affects the current session:
8.4.1 Supported Properties
The supported properties of the target
settings1
as follows:
Table 16: Settings1 - Supported Properties
Property Task
cdt
Represents the current default directory. This is the path from where the session
starts.
outputformat This R/W property gives the output format: clpxml, text, clpcsv.
Keyword of the current running SMASH* session. The values supported by this
property are explained as follows:
 Clpxml - The output format of the current running SMASH* session is in the .xml
format > set outputformat=clpxml
 Keyword - The output format of the current running SMASH8 session is in the
keyword format > set outputformat=keyword.
 Text - The output format of the currently running SMASH session is in the text
format-
>set outputformat=text. By default, this property value is assigned to text.
 Clpcsv – This output format of the currently running SMASH* session has a “clpcsv”
table to represent the Command Status. Each line of the “clpcsv” output data has its
first item either as the “header” or as the “group” keyword. Rows beginning with the
“header” keyword specify the start of a new table and the items in the comma -
separated list of keywords identify the output data elements that appear in each
row of the table. Rows beginni
ng with the “group” keyword specify a row of table
values for the preceding header.
timeout  The R/W property timeout represents the inactivity timeout value in seconds of the
currently running SMASH* session. If the SMASH* session is inactive for the
timeout value seconds mentioned, then after reaching the timeout value this session
will exit automatically.
The value of this property can be set to a preferred inactivity time. > set
timeout=300. By default it is assigned to 500.
identity This read only property gives a brief explanation of the present target and cannot be
changed.
8.4.2 Supported Verbs
The supported verbs of the
settings1
target are as follows:
Table 17: Settings1 - Supported Verbs
Verb Is used to
cd change from one valid target path to any other valid target path.
exit exit from the current SMASH* session.