SMASH
–
Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide
Revision 1.3
70
8.6.3
Terminating an SOL Session
SOL session can be terminated using the following control key sequence:
CR, ESC, T or t
CARRIAGE RETURN/ENTER key, followed by ESCAPE key, followed by T or t
Control key sequence ‘Ctrl + [can be used in place of ESCAPE key].
Once terminated, the control returns to SMASH-Lite* session.
8.7
Enetport1
The BMC in the managed system needs the system’s IP Address and MAC Address in order to
be able to respond to UDP/IP packets or generate LAN alerts.
Enetport1
(Ethernet port
target) gives the port address information. Enetport1 contains only one target named
lanendpt1
.
8.7.1
Supported Properties
The supported properties of the target
enetport1
are as follows:
Table 22: Enetport1 - Supported Properties
Property
Task
macaddress
Address that was received by the activated session. This read only property gives the
value of the MAC address. Mac address is a unique identifier attached to most
network adaptors (NICs).
Identity
This read only property gives a brief explanation of the present target and cannot be
changed.
8.7.2
Supported Verbs
The supported verbs of the
enetport1
target are as follows:
Table 23: Enetport1 - Supported Verbs
Verb
Is used to
cd
change from one valid target path to any other valid target path.
exit
exit from the current SMASH* session.
help
provide information on using SMASH*.
show
show all the targets, properties, and verbs supported by this target.
version
show the current version of SMASH*.
