Hardware Installations and Initial Configuration
Intel® Remote Management Module 3 User Guide
Revision 1.3
12
3.3.2
Installation on Intel
®
Server Boards S5520HC, S5520BC, and S5520SC
The Intel
®
Server Boards S5520HC, S5520BC, and S5520SC install in pedestal style chassis.
1. Attach the Intel
®
RMM3 to the connector on the server baseboard labeled “RMM”.
2. Mount the bracket with the RMM3 module in a chassis slot near the baseboard
connector for the cable.
3. Attach the cable from the baseboard to the RMM3 module as shown.
4. Make a note of the MAC address of the Intel
®
RMM3. It is written on a label attached to
the module (not the NIC). Keeping a record now may eliminate the need to reopen the
cover later.
5. Replace the chassis cover, attach AC power and connect a network cable to the Intel
®
RMM NIC
Figure 5: Installing Intel
®
RMM3 on Intel
®
Server Boards S5520HC, S5520BC, and S5520SC
