Intel® Remote Management Module 3 User Guide
Configuring Intel® RMM3
Revision 1.3
25
4.3
Configuring Your Server Using Intel System Configuration Utility
(SysConfig)
This section explains how to configure using Sysconfig commands.
4.3.1
Running the Sysconfig
To run Sysconfig enter the Sysconfig directory using this command:
cd /usr/local/syscfg
4.3.2
Configuring IP address
To set static IP address:
syscfg -le 3 static <STATIC_IP> <SUBNET_MASK> -lc 3 12
<DEFAULT_GATEWAY_IP>
To set dhcp IP address:
syscfg -le 1 dhcp
Additionally, to enable SOL (can be used for either static or DHCP)
To enable Serial Over LAN (SOL)
syscfg -sole 3 Enable Admin BAUD_RATE RETRY_COUNT
RETRY_INTERVAL_IN_MILLISECONDS
4.3.3
Configuring Users
To enable a user for RMM3 channel
syscfg -up 3 3 Admin sol -ue 3 Enable 3
