
Intel® Remote Management Module 3 User Guide
Configuring Intel® RMM3
Revision 1.3
15
4.
Configuring Intel
®
RMM3
This section discusses using the Server Utilities to enable an Intel
®
RMM3, includes RMM3 Lite
and RMM3 Lite-V, from a new unconfigured state to an operational one.
Note
: You can download the IDA and SYSCFG software from the following links:
http://www.intel.com/p/en_US/support/highlights/server/ida
http://downloadcenter.intel.com/default.aspx
> relevant server platforms page
Through BIOS Setup
When first powered on, by default, the Intel
®
RMM3 uses a static IP address of 0.0.0.0.
The Intel
®
RMM3 can be configured in many ways: using the Intel
®
Deployment Assistant (IDA),
Sysconfig, and IPMI commands.
The following two steps are necessary before RMM3 can be used:
1. One or both LAN channels must be configured as either DHCP or static addresses.
2. At least one user must be enabled to use the LAN channel(s).