Intel L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6 Tray, Datasheet

Page: 26 / 114

Dual-Core Intel® Xeon® Processor 5200 Series Electrical Specifications
26
2.11 Mixing Processors
Intel supports and validates dual processor configurations only in which both
processors operate with the same FSB frequency, core frequency, power segments, and
have the same internal cache sizes. Mixing components operating at different internal
clock frequencies is not supported and will not be validated by Intel. Combining
processors from different power segments is also not supported.
Note: Processors within a system must operate at the same frequency per bits [12:8] of the
CLOCK_FLEX_MAX MSR; however this does not apply to frequency transitions initiated
due to thermal events, Extended HALT, Enhanced Intel SpeedStep Technology
transitions, or assertion of the FORCEPR# signal (See Chapter 6 ).
Not all operating systems can support dual processors with mixed frequencies. Mixing
processors of different steppings but the same model (as per CPUID instruction) is
supported. Details regarding the CPUID instruction are provided in the AP-485 Intel
®
Processor Identification and the CPUID Instruction application note.
2.12 Absolute Maximum and Minimum Ratings
Table 2-11 specifies absolute maximum and minimum ratings only, which lie outside
the functional limits of the processor. Only within specified operation limits, can
functionality and long-term reliability be expected.
At conditions outside functional operation condition limits, but within absolute
maximum and minimum ratings, neither functionality nor long-term reliability can be
expected. If a device is returned to conditions within functional operation limits after
having been subjected to conditions outside these limits, but within the absolute
maximum and minimum ratings, the device may be functional, but with its lifetime
degraded depending on exposure to conditions exceeding the functional operation
condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long-term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time then, when returned to conditions within the
functional operating condition limits, it will either not function or its reliability will be
severely degraded.
Although the processor contains protective circuitry to resist damage from static
electric discharge, precautions should always be taken to avoid high static voltages or
electric fields.