Intel L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6 Tray Datasheet Download Page 101 | Manualshive

Page: 101 / 114

background image

101

Boxed Processor Specifications

Notes:

1.

The heat sinks represented in these images are for reference only, and may not represent the final boxed

processor heat sinks.

2.

The screws, springs, and standoffs will be captive to the heat sink. This image shows all of the components

in an exploded view.

3.

It is intended that the CEK spring will ship with the base board and be pre-attached prior to shipping.

8.2

Mechanical Specifications

This section documents the mechanical specifications of the boxed processor.

8.2.1

Boxed Processor Heat Sink Dimensions (CEK)

The boxed processor will be shipped with an unattached thermal solution. Clearance is
required around the thermal solution to ensure unimpeded airflow for proper cooling.
The physical space requirements and dimensions for the boxed processor and
assembled heat sink are shown in

Figure 8-4

through

Figure 8-8

.

Figure 8-9

through

Figure 8-10

are the mechanical drawings for the 4-pin board fan header and 4-pin

connector used for the active CEK fan heat sink solution.

Figure 8-3. 2U Passive Dual-Core Intel® Xeon® Processor 5200 Series

Thermal Solution (Exploded View)

«
...
99
100
101
102
103
...
»

Summary of Contents for L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6 Tray



















































































































Reviews:

No comments

Related manuals for L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6 Tray

Brand: FabiaTech Pages: 4

Brand: National Instruments Pages: 17

Brand: Edge-Core Pages: 7

Asynchronous SH7145F

Brand: Renesas Pages: 17

ThunderLAN TNETE100A

Brand: Texas Instruments Pages: 179

Brand: Barco Pages: 121

Brand: FS Pages: 19

EZ-Extender Analog 120-Pin Probing Board

Brand: Analog Devices Pages: 29

Seven Solutions WR-ZEN Series

Brand: Orolia Pages: 167

Brand: Glacier Pages: 2

Low Power Series

Brand: FabiaTech Pages: 77

Brand: Comway Pages: 20

Brand: SriHome Pages: 12

Brand: JETWAY Pages: 47

Brand: Microtek Pages: 25

Brand: Altimium Pages: 12

Brand: Dantel Pages: 22

Vortex86SX VSX-6101

Brand: ICOP Technology Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands