Figure 25.
The DDR4-RDIMM Tab
Same with DDR4-COMP0.
4.3. Control On-board Clock through Clock Controller GUI
The Clock Controller GUI can change on-board Si5391 programmable PLLs to any
customized frequency between 100 Hz and 712.5 MHz.
The instructions to run Clock Controller GUI are stated in the
on page
24. It can also be started with the BTS GUI icon “Clock”.
The Clock Controller communicates with the System Intel MAX 10 device through
either USB port J8 or 10-pin JTAG header J10. Then System Intel MAX 10 controls
these programmable clock parts through a 2-wire I
2
C bus.
Note:
You cannot run the stand-alone Clock Controller GUI application when the BTS or
Power Monitor GUI is running at the same time.
Figure 26.
Clock Controller GUI
4. Board Test System
683288 | 2022.09.22
Intel
®
Agilex
™
I-Series FPGA Development Kit User Guide
35
