manualshive.com logo in svg

Inspur Tiansuo TS860, User Manual

Share
Download
Inspur Tiansuo TS860 User Manual Download Page 63

Chapter 6 OLED Usage Introduction

59

3. Alarm information:

 PSU, CPU Core Voltage, CPU Temperature, System fan, 

Storage board fan, Hard disk.

Note: UseRatio /String/SV_NUM scrolling display interface displays CPU model, 

OS model, CPU utilization, memory utilization and other information, which relies 
on OLED agent side--Agent program to provide related data. So, if there is no Agent 
program, the information that the scrolling display interface shows will be 0 or none 
related information.

Agent program installation method is as follows: 
1) Install under Linux system:

①

 Unzip the software agent_linux.tar.gz under the \TS860_Agent directory in the 

attached driver CD.

②

 Enter agent_linux directory, modify the priority of the executable file: 

chmod777 start.sh

③

 Run ./start.sh

2) Install under Windows system
Agent program doesn’t support windows system at present.

Summary of Contents for Tiansuo TS860





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands