manualshive.com logo in svg

Inspur Tiansuo TS860, User Manual

Share
Download
Inspur Tiansuo TS860 User Manual Download Page 57

Chapter 5 Integrated Management Functions Introduction

53

modified before loading factory defaults or upgrading Firmware. The selected option 

will not be changed because of loading factory defaults or Firmware upgrading.

2. Restore Configuration

This menu is used to load the IPMI management card factory defaults.
3. System Administrator
This menu is used to set the system administrator account.

8. Firmware Update menu

The function menu can set the BMC Firmware remote upgrade and image transfer 

protocol.

(1) Firmware Update menu

This menu can realize the remote upgrade of management card Firmware, we 

recommend that you do not upgrade by yourself, if it is really necessary, the upgrade 

file must be certified by Inspur.

①

In Firmware Update menu interface, click [Enter Update Mode]. In the pop-up 

confirmation window, click [OK]; wait to enter the following interface.

②

click “Browse” after input box and select the ROM image (* .ima file) you 

want to flash from the client’s disk, as shown below:

Summary of Contents for Tiansuo TS860





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands