manualshive.com logo in svg

Inspur Tiansuo TS860, User Manual

Share
Download
Inspur Tiansuo TS860 User Manual Download Page 48

Chapter 5 Integrated Management Functions Introduction

44

3. Server Health menu

From this menu, you can check server health-related data, including Sensor 

Readings (sensor readings), Event Log (Event Log), System and Audit Log, BSOD 
Screen, as shown below:

  

①

 Sensor Readings menu: Display all the sensor values, mainly including 

temperature, voltage, fan speed, hard drive and power status. You can refresh and 
display sub-categories.

②

 Event Log menu: Display sensor events, BIOS events, system management 

software events, OEM events, remote console software event logs. It can be classified 
or unified and you can check the logs anytime, the logs can also be cleared.

③

 System and Audit Log menu: Display system logs and check logs. System logs 

need to be classified.

④

 BSOD Screen menu: In this menu, you can check blue screen information 

during the latest system boot.

Summary of Contents for Tiansuo TS860





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands