Chapter 2 Brief Introduction
17
If the device is unavailable, it will continue to boot the rest corresponding device.
Note:
According to the configured memory capacity, it will take 4 minutes or longer
for the display connected to the server to have display.
Close the server
1. Closing down the server can be achieved through the operation under the
operating system.
2. Closing down the server can be achieved through manually pressing the switch
button on the front panel.
Note:
after the above two ways, although the server stops running, some voltage
is still in a usable state, and the system can be started through remote management; to
achieve complete shut down, you need to disconnect the system’s AC power (unplugging
the power line or turning off power strip)
