Chapter 3 System Setup
25
* QPI Per Socket Configuration
To set QPI of each processor, including assign proportion of CPU bus resources,
IO resources and MMIO resources.
● Memory Configuration
To set the related parameters of memory
BIOS Setting
Options
Description
DDR Speed
Auto/1067/1333/
1600
Set memory working frequency (MHz). When it
is “Auto”, the memory will work at the highest
frequency supported by CPU and installed
memory. Default is Auto.
Rank Margin Tool Enable/Disable
Enable or disable Rank Margin Tool, if enabled, it
can test the memory Margin; default is Disable.
RMT Loop count 1~31
Set RMT loop count
Data Scrambling Enable/Disable
Enable or disable memory data scrambling,
default is Enable.
VMSE RMT
Enable/Disable
Enable or disable VMSE RMT, default is Disable.
VMSE RMT
CPGC Pattern
Length
0~30
Set VMSE RMT cycles.
Memory
Topology
No Options
Display topology of installed memory, including
memory installation location, frequency,
manufacturers, capacity and other informatio
n.
If it cannot be showed in one page completely,
you can flip over through Page down or Page up
to view i
t.
● Memory RAS Configuration
To set memory RAS features
