Chapter 2 Brief Introduction
16
IO Riser port
Name
Function and description
Network port 0/1/2/3 Each IO Riser integrates 4 Gigabit network ports.
USB port 1/2
Connect USB devices.
VGA port
Connect display equipment with standard VGA port.
Management port
Independent RJ45 Gigabit management interface
The system monitoring and management can be realized by the
integrated BMC.
Note:
the amount of I/O interface in the above table is under the condition of
configuring one IO Riser.
Start the server
1. First correctly connect the monitor, keyboard and mouse. Then connect all
PDUs configured with this server to the effective power strip or outlet by using the
attached power cable.
2. Press the switch button on the front panel of the server, the fan will run and
system start to power up and self-test.
3.
The server will boot from the first device set in BIOS starting-up management.
Network port0
Network port2
USB port
VGA port
Network port1
Network port3
Management port
